Curatron XP Special Edition (XPSE)

Are you looking for an effective, non-drug solution to build bone in osteoporosis or to alleviate arthritis or other rheumatic pain successfully?   The Curatron XP Special Edition (XPSE) delivers strong, pulsed electromagnetic field therapy in the milliTesla range, equal in intensity to that of the company’s 2000 PC for health professionals which has worked so well for us for these purposes.  We see no reason for equipment at home intended to build bone or treat pain to be less effective than a professional system.  We believe anyone being treated deserves the best.  Easy to set up and user-friendly, we recommend the Curatron XPSE for the discerning consumer or practitioner who is seeking strong PEMF and significant benefits without a computer interface.

Electromagnetic fields in the milliTesla range increase circulation and improve blood and tissue oxygenation.  They have been shown to help restore a healthy balance between the breakdown of bony tissue and its regeneration and to reduce the chronic inflammation which characterizes arthritis, osteoporosis and other rheumatic conditions.  Most importantly perhaps, they have been shown to activate and stimulate osteoblasts, the cells which lay down bone, increasing the formation of healthy, new bone while also helping to prevent its further loss.   A substantial increase in bone density may be achieved in osteoporosis, and non-union fractures, bones which have fractured but not healed, have been shown to mend with PEMF even when they’ve not done so for many years. 

Case Study – Osteoporosis

“My doctors have told me that I should keep up whatever I am doing,” said my slim, 88 year old female patient.   “Joan” had stopped taking Boniva, the drug prescribed for her osteoporosis when she came to our clinic over two years earlier.  Since then she has treated herself at home with pulsed electromagnetic field therapy x 30 minutes daily.  Laser therapy has also been administered as needed for pain at office visits over her lumbar spine and hips, where bone loss was greatest.  Below are results from “Joan’s” bone density testing.  When she shared them with me, she also gave me a big kiss!

Bone Densitometry Results L1-L4

Measured
Date
Measured
Age
WHO
Class
Young Adult
T Score
Bone Mineral
Density
% Change
vs Previous
12/11/09 89.8 Osteoporosis -2.7 0.854 g/cm2 +8.8%
1/30/08 88.0 Osteoporosis -3.3 0.785 g/cm2 +0.5%
10/31/06 86.7 Osteoporosis -3.3 0.781 g/cm2

By 1/30/08, approximately 3 months after beginning pulsed electromagnetic field therapy (PEMF) and laser treatment, “Joan’s” bone density had increased by 0.5% at L1-L4, the area of severe osteoporosis.  By 12/11/09 she had gained another 8.8% bone density in her lumbar spine. It is important to understand that individuals with severe osteoporosis typically experience frequent, intermittent back pain due to “compression” fractures which can occur spontaneously in weakened bone.  “Joan” seldom has pain these days and has reported better overall health, energy and ability to exercise.[1]  See the entire article by David Rindge from which “Joan’s” case study above is taken, Dem Bones, Dem Bones, Dem New Bones, published in Acupuncture Today in October 2010 HERE.

The system “Joan” used was the XP with a single, 20″ x 28″  therapy pad applied to the lumbar spine and hips daily or near daily.   We believe the XPSE with a single therapy pad would likely have given even better results as 40 milliTeslas since it is at the top of the range reported to maximally stimulate the formation of new bone by Rubin et al [2], but either system may be a logical choice.  To administer PEMF of 40 milliTeslas to both the upper and lower body simultaneously, a switch box is necessary, and two therapy pads might be placed, one above and another below.  On the other hand, a single therapy pad may be all that is necessary to address the targeted area of bone loss, depending on its size.  

The Curatron XPSE is equal in strength to the computerized PC system at peak intensity and, as such, may be ideal for the home, able to operate all available applicators at full strength, including the new Combination High Power, PEMF-LED Probe.  Compare the field strength of each of the applicators the XP, XPSE and PC systems in the table below.  You might add any individual applicator when and if you determine that doing so makes sense for your situation once you have chosen the right basic system. 

 

 

                                                 Comparison of Intensity

  Curatron Model       XP           XPSE      PC
 
 Full Body Mattress
   10 mT/100 G  15 mT/150 G  15 mT/150 G  
 Therapy Pad    30 mT/ 300 G 40 mT / 400 G  40 mT / 400 G  
 Very High Energy Coil                     70 mT/700 G 100 mT/1000G  100 mT/1000G  
 High Power, PEMF-LEDT  Probe
100 mT/1000 G 150 mT/1500G  150 mT/1500 G

Operation of the Curatron XPSE is easy.  Connect the appropriate applicator to the control unit by its cable.  Place the applicator under or over the area to be treated.  Select one of the 10 built in therapy programs, and press Start.  The system will go on standby automatically once the program has been completed.

The Curatron XPSE will operate the Combination High Power, PEMF-LED Probe by itself at full strength, or, with the optional Switchbox,  any two of the following applicators simultaneously and at full intensity: Therapy Pad, Very High Energy Coil and Full Body Mattress.    Highly recommended!

Order one or more applicators with this unit and also the Switchbox if you plan to operate two applicators.     

Curatron 2000XP Special Edition (XPSE)                                   $4,750.00

 

 

 

Applicator: Therapy Pad      20”  x  28”                                          $630.00

 

 

 

 

Applicator: Very High Energy Coil     8” x 8”                                 $765.00

 

 

 

 

Applicator:  Full Body Mattress     26” x 71”                                  $935.00

 

 

 

Applicator:  Combination, Hi-Power, PEMF LED Probe              $3,750.00

 

 

 

 

Option:  Switchbox for 2 applicators                                                $265.00

 

 

 

Shipping & Handling:  Shipping to USA and Canada is $175 for PC, XPSE, XP and PC systems and 250.00 for the 3-D systems.   All Curatronic products are shipped from the manufacturer in Israel on Mondays and Wednesdays and customarily arrive within 7-10 days of the shipping date.

Insurance:  Insurance on shipping is at your request at the time you place your order.  Please decide whether you wish to insure your shipment before you order.  Costs to insure shipping are:

  • FLASH, PC, XPSE and XP systems: $45
  • Ultra 3-D system: $60
  • Combination PEMF-LED Probe: $25

All medical device sales are final.

[1] Rindge, David, Dem Bones, Dem Bones, Dem New Bones, Acupuncture Today, October, 2010
[2] Rubin, CT, McLeod, KJ, Lanyon, LE, Prevention of osteoporosis by pulsed electromagnetic fields.  J Bone Joint Surg Am. 1989 Mar; 71(3): 411-7.